---
title: "Newland HR23 Bluetooth configuration"
description: "Setting up Bluetooth on your iPad"
url: https://helpcenter.c1st.com/en/articles/10821436-newland-hr23-bluetooth-configuration
collection: "Stregkodescanner"
updated: 2026-10-06
language: en
alternates: [da, nb, sv]
---

# Newland HR23 Bluetooth configuration

Setting up Bluetooth on your iPad

How to connect the scanner via Bluetooth

## 1\. Enable Bluetooth on the scanner

Start by scanning **the 3 barcodes below in the order shown**:

1.  **Enter Setup**
    
    ![](https://staticfiles.gleap.io/ghelparticle/VWDVTPnY7RU4qjHdxDFIyYyDXnjvPvBVQFQ0m8YC3IkHV24LDFYUPafIDqzuYDDTWDSs1VLmPKp.png)
2.  **Bluetooth HID**
    
    ![](https://staticfiles.gleap.io/ghelparticle/ISzGF0UWvaFEyL7JBufPfDJFtywWljNQaqUqsqD8XmFRYxTchSJ33I70AM8RMisTg5gP18GAXEz.png)
3.  **Exit Setup**
    
    ![](https://staticfiles.gleap.io/ghelparticle/mlOhquLuLrDwTRcqAGW1ZWAiayUCVnWcKp5CJww3LZEif0w3zWPk2BbtI45kwiPC2Cj17BKOo6N.png)

Once all 3 barcodes have been scanned, Bluetooth is enabled on the scanner.

## 2\. Connect the scanner to your device

1.  **Turn on Bluetooth** on the computer or device you want to connect the scanner to.
    
2.  Search for new Bluetooth devices.
    
3.  Find the scanner in the list. It will typically be named:
    
    **HR2300-XXXXXXX** or **HR3300-XXXXXXX**
    
    The last 7 characters correspond to the last 7 characters of the scanner's serial number.
    
4.  Select the scanner and press **Connect**.
    
5.  When the connection is established successfully, the scanner **beeps**, and the **white LED lights up**.
    

**The scanner is now connected via Bluetooth and ready to use.**
