The computer comes in 3 main parts: the screen (including the computer module), the arm, and the base.
Start by assembling the base/stand:
Push the arm down onto the base plate. Turn the base over with the arm attached, and tighten the screw by hand so the screw from the base plate goes into the arm and secures it tightly. This ensures the arm and base won’t separate when lifted.
Next, attach the screen unit to the assembled stand.
Lay the screen face down (make sure to place it on a soft surface that won’t scratch the screen!) and slide and click the stand into the back of the screen.
Once the unit is assembled, you can proceed to connect the cables.
Assemble the power supply by plugging the included power cable into the power brick.
Connect the power supply cable to the back of the computer (yellow plug).
Plug in the mouse and keyboard to one of the five USB ports, available on both the left and right sides.
Connect the network cable to the network port behind the panel so the computer can access the internet.
If applicable, connect any additional accessories such as receipt printers, label printers, barcode scanners, etc., using the remaining USB ports.
Turn on the computer using the power button on the side and wait for it to boot up.
