---
title: "Setting Up Metapace T-3 Receipt Printer"
description: "Here's how to install your new Metapace T-3II receipt printer in just a few minutes."
url: https://helpcenter.c1st.com/en/articles/6164537-setting-up-metapace-t-3-receipt-printer
collection: "Receipt Printers"
updated: 2026-10-27
language: en
alternates: [da, sv, nb]
---

# Setting Up Metapace T-3 Receipt Printer

Here's how to install your new Metapace T-3II receipt printer in just a few minutes.

If you've received your new Metapace T-3 USB receipt printer, just read along here to get started printing receipts right away. The setup is quick and easy, but of course you're always welcome to [write to our support](mailto:support@c1st.com) if you run into problems or have questions about the setup.

* * *

## **Connect the printer**

1.  Start by connecting the printer to your PC with the included USB printer cable. (Orange)
    
2.  Then connect the printer to power with the plug from the power supply. Remember to plug it in the right way or you can damage the pins on the plug. (Green)
    
3.  **_OPTIONAL_** _\-_ Connect your cash drawer's cable to the RJ12 port at the back of the printer. (Red)
    

![](https://staticfiles.gleap.io/helpcenter/67bc4100bdec4da8846ccbd3/20250318160229_6020.jpg)

* * *

## **Install the printer (Windows)**

1.  [Download Metapace T-3II printer driver for Windows](https://www.metapace.com/downloads/driver/en/Software_T-3II_WIN_V1.0.7.zip).
    
2.  Run the installer as administrator.
    
3.  Click **Next.**
    
    ![](https://staticfiles.gleap.io/helpcenter/67bc4100bdec4da8846ccbd3/20250318160210_6593.png)![](https://staticfiles.gleap.io/helpcenter/67bc4100bdec4da8846ccbd3/20250318160205_2533.jpg)
    
4.  When the installer asks which port you want to use, make sure **USB** is selected.
    
5.  Once that’s done, just wait for the driver installation to finish.
    
6.  6\. After the printer driver is installed, you should be able to find the receipt printer in your printer list in Windows. The printer is called "Metapace T-3II".
    

If you don’t see the printer right away, you can try restarting the printer by turning it off and on again at the front.

![](https://staticfiles.gleap.io/helpcenter/67bc4100bdec4da8846ccbd3/20250318160210_0694.png)

* * *

## **Connect the printer in the app**

1.  Log in to the system.
    
2.  Go to **Settings.**
    
3.  Select the **Print** tab at the top.
    
4.  Under **Receipt** you should now be able to select the system printer from the drop-down list.
    
    **_Note: If you can only choose Web browser, it's because you haven't installed_** [**_Printdesk_**](https://helpcenter.c1st.com/da/articles/6454002-installation-af-printdesk-automatisk-in-app-print.md)**_, which you need to print directly from the system to the printers._**
    
5.  When the receipt printers are selected in the list, you can hit the **Test** button and it should print a test receipt on the printer.
    
    ![](https://staticfiles.gleap.io/helpcenter/67bc4100bdec4da8846ccbd3/20250318160205_8122.png)
    
    **Note: As a rule, we don't recommend messing with the settings below unless the print looks wrong.**
    
    * * *
    
      
    00**Read also:** [**Setting up the cash drawer for Metapace T-3II receipt printer**](https://helpcenter.c1st.com/da/articles/6164561-opsaetning-af-kasseskuffe-til-metapace-t-3ii-bonprinter.md)
